Delamination onset and growth in composite shells

verfasst von: Saleh Yazdani, Wilhelm J.H. Rust, Peter Wriggers
Abstract: In this paper an efficient numerical tool is proposed to investigate delamination type failure in multi-layered composite shells. In the current contribution the extended finite element method (XFEM), the mixed-mode cohesive zone model, the contact formulation, and the damage criterion are incorporated into a new algorithm to study the interfacial delamination initiation and growth with less computational effort. A flat-shell formulation is developed in the geometrically non-linear regime to study the response of shells in small strains and moderate rotations. In addition, the equivalent single layer theory (ESLT) is applied to simulate the multi-layered laminates. This formulation is enhanced through the XFEM topology to be able to model discontinuous domains and a mixed-mode bilinear cohesive formulation to track the delamination growth. In the current study, the simulation can be initiated in an intact laminate. Thus, unlike formulations in existing finite element models, incorporating cohesive zone model at all available interfaces is not necessary. The interlaminar stresses are calculated during post-processing and they are being used in the delamination onset criterion. As soon as the criterion is satisfied at a specific layer and location, the formulation of that corresponding element is locally changed to XFEM and the cohesive behaviour. Consequently, the possibility to track delamination growth is locally provided; and hence, the computational cost is reduced.
Organisationseinheit(en): Institut für Kontinuumsmechanik
Externe Organisation(en): Hochschule Hannover (HsH)
Typ: Artikel
Journal: Computers and Structures
Band: 195
Seiten: 1-15
Anzahl der Seiten: 15
ISSN: 0045-7949
Publikationsdatum: 04.10.2017
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Tief- und Ingenieurbau, Modellierung und Simulation, Allgemeine Materialwissenschaften, Maschinenbau, Angewandte Informatik
Elektronische Version(en): https://doi.org/10.1016/j.compstruc.2017.09.007 (Zugang: Geschlossen)
: Details im Forschungsportal „Research@Leibniz University“

BibTeX

@article{968fc021c754448f83a56d72397e1f5e,
title = "Delamination onset and growth in composite shells",
abstract = "In this paper an efficient numerical tool is proposed to investigate delamination type failure in multi-layered composite shells. In the current contribution the extended finite element method (XFEM), the mixed-mode cohesive zone model, the contact formulation, and the damage criterion are incorporated into a new algorithm to study the interfacial delamination initiation and growth with less computational effort. A flat-shell formulation is developed in the geometrically non-linear regime to study the response of shells in small strains and moderate rotations. In addition, the equivalent single layer theory (ESLT) is applied to simulate the multi-layered laminates. This formulation is enhanced through the XFEM topology to be able to model discontinuous domains and a mixed-mode bilinear cohesive formulation to track the delamination growth. In the current study, the simulation can be initiated in an intact laminate. Thus, unlike formulations in existing finite element models, incorporating cohesive zone model at all available interfaces is not necessary. The interlaminar stresses are calculated during post-processing and they are being used in the delamination onset criterion. As soon as the criterion is satisfied at a specific layer and location, the formulation of that corresponding element is locally changed to XFEM and the cohesive behaviour. Consequently, the possibility to track delamination growth is locally provided; and hence, the computational cost is reduced.",
keywords = "Cohesive, Delamination, Shell, XFEM",
author = "Saleh Yazdani and Rust, {Wilhelm J.H.} and Peter Wriggers",
note = "Funding Information: The present work was supported by the Government of Lower Saxony of Germany under the framework of the project MARIO (Multifunctional Active and Reactive Interfaces and Surfaces). The authors gratefully acknowledge this support. Publisher Copyright: {\textcopyright} 2017 Elsevier Ltd Copyright: Copyright 2020 Elsevier B.V., All rights reserved.",
year = "2017",
month = oct,
day = "4",
doi = "10.1016/j.compstruc.2017.09.007",
language = "English",
volume = "195",
pages = "1--15",
journal = "Computers and Structures",
issn = "0045-7949",
publisher = "Elsevier Ltd.",
}